Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Compton
When a gate post leans or a roller seizes up on a Compton driveway, you need a crew that knows the difference between a 1958 tract-house lot and a newer build. Gate parts and welding in Compton means working around concrete block walls, shared driveways, and gates that have been holding up for sixty years. We answer the phone at (747) 774-7784 and send a truck to your street, usually the same day you call. The work gets quoted before we touch a bolt, and it gets done right the first time.
We serve every corner of Compton, from the neighborhoods off Rosecrans and Central up to the streets around Compton Boulevard and Alameda. No answering service. No runaround. Just a real person who knows gates.
Why Ironworks Gate Co. Is Compton’s Preferred Gate Parts & Welding Company
Victor Salinas founded this company in 1984, and we have spent more than four decades earning the trust of homeowners who expect a gate to work like it did the day it was hung. Compton customers keep our trucks busy for a reason: they know we will not sell them a repair they do not need, and we stand behind every weld, hinge, and roller with a written 90-Day Done Right Promise.
Our reputation in Compton is built on showing up when we say we will. A homeowner near the 90220 side of town does not have time to wait around for a crew that might come Thursday. We schedule a window, we hit it, and we keep the driveway usable while we work. Many of our Compton jobs come from neighbors who watched us fix a gate down the street and then called the number on our truck. That is how a gate company should be measured.
We are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, and BFT, so when a Compton gate throws an error code after a welding repair, we can diagnose the operator on the same visit. Most jobs finish in one trip.
Our Gate Parts & Welding Services in Compton
The Gate Parts & Welding work we do in Compton is shaped by what this city demands: tight clearances, old steel, and gates that have to keep working tomorrow morning. Here is what we handle most often.
Hinge Replacement
Compton swing gates hang on hinges that have been carrying weight since the Eisenhower administration. When a hinge pin shears after a Santa Ana blow, the gate sags and drags across the driveway. We cut out the old hinge, weld in a new one with a gusset plate where the post will take it, and set the gate back to plumb. The job usually takes a few hours, and the driveway stays usable while we work.
Post Replacement
A leaning post on a 1950s Compton driveway usually means the concrete around the footing has cracked and let water in. We saw out the old post, dig a new footing with proper depth for the soil here, and weld or anchor a new post into fresh concrete. The difference matters here because Compton’s clay soil expands and contracts through the dry season, and a post set too shallow will lean again within two years. We set it deeper than most, and we warranty the work in writing.
Rail Repair
Sliding gates on Compton’s shared driveways ride on rails that take constant abuse from tree roots and truck traffic. When the rail dips or bows, the gate binds mid-travel or jumps the track entirely. We straighten bent rail sections where we can, and where the rail is too far gone we cut it out and weld in a new length, shimmed level and anchored solid. If your gate has been scraping or wobbling, the rail is usually where the problem starts.
Custom Welding
Some Compton gates were built for a truck that no longer exists, or a property line that has shifted. We build custom brackets, reinforcement plates, gate extensions, and complete frame repairs right on your driveway. Our welders carry mobile rigs and a stock of steel in the truck, so we can cut, shape, and weld on site without hauling your gate to a shop. That matters when your driveway is shared and you cannot leave the opening unsecured overnight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Compton
Whatever automation sits on your gate, we have seen it before and we know how to fix it properly. Our technicians carry service training on LiftMaster, FAAC, BFT, Linear, and five other major openers, so when we weld a bracket or replace a roller, we also check that the operator and safety edges are set correctly. If your LiftMaster keeps throwing a fault after a gate repair, we diagnose it on the same visit. We keep common rollers, hinges, brackets, and operator parts stocked in our trucks, which means fewer second trips for Compton homeowners.
Common Gate Parts & Welding Problems We See in Compton Homes
- Leaning hinge posts from cracked 60-year-old driveway concrete. Compton’s post-WWII concrete driveways have been heaving and cracking for decades, and when the slab moves, so does the gate post. We re-plumb or replace the post and re-pour the footing so the gate stays square.
- Slide gates binding in tight shared driveways. Many Compton lots have just a few feet between the house and the property wall. A slide gate with a worn roller or a slightly bowed rail starts grinding against the block wall mid-travel, and forcing it only bends the frame worse.
- Post-Santa Ana hinge and frame damage. Every fall, we get a spike in calls from Compton homeowners whose unlatched swing gates caught a 40 mph gust and sheared a hinge pin or twisted the frame. That is a Comptonspecific season, and we know it is coming.
- Rack and pinion wear on older slide gates. Gates that run alongside Alameda Street truck traffic get shaken constantly, and the rack teeth wear unevenly. The gate starts lurching instead of gliding, and the operator overworks itself. We replace the rack section and set the mesh clearance correctly.
Pricing for Gate Parts & Welding in Compton, CA
You will not get a surprise invoice from us. The price is quoted and agreed before any work starts, and that is the price on the bill. Period.
Here is what you can expect for common gate parts and welding work in Compton:
| Service | Typical Compton Price Range |
|---|---|
| Hinge replacement (single gate) | $180 - $340 |
| Post replacement (including concrete footing) | $350 - $650 |
| Rail repair (straighten or section replacement) | $220 - $480 |
| Gate roller replacement (each) | $90 - $180 |
| Custom welding repair (bracket, frame, or reinforcement) | $150 - $500 |
| Rack and pinion replacement | $200 - $400 |
These ranges reflect what we see across Compton’s 90220, 90221, and 90222 zip codes. The final number depends on how much steel has to be removed, whether the concrete needs re-pouring, and how tight the access is. We write the quote before we pick up a grinder, and we honor it. Call (747) 774-7784 for a free estimate on your specific gate.
We Also Serve Cities Near Compton
Our Gate Parts & Welding in Compton crews also cover nearby communities where the same tight-lot conditions and aging gates are common. If you are in Lynwood, Paramount, South Gate, or Huntington Park, the same crew, the same pricing, and the same written guarantee apply. Call the same number: (747) 774-7784.
Serving Compton, CA - Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Compton
In most cases, yes. We can cut the old post away, weld the new post to a steel base plate, and anchor it with core-drilled bolts rather than jackhammering your entire driveway. The plate spreads the load so the gate stays square without demolishing the surrounding concrete. We will always show you the condition of the existing slab before we decide, because a badly cracked section may need a spot pour anyway. Call us at (747) 774-7784 and we will come look at your specific driveway.
Heavy truck traffic sends vibration through the ground, and over time that shakes the supporting rail anchors loose and chews the rollers into flat spots. The gate starts riding up and over the rail instead of tracking straight. The fix is to re-anchor the rail, replace the flat-spotted rollers, and reset the track level. We see this constantly on the commercial side of western Compton. If the gate is jumping, the longer you force it, the more damage it does to the wheel carriages and the operator chain.
A weld repair itself does not trigger UL 325, but if the gate is automated, it has to keep of meeting the same entrapment-protection requirements it did when the operator was installed. That means the safety edges, photo eyes, and reverse function have to stay functional after we weld. We check every automated gate after a structural repair and we will tell you plainly if a safety guard needs replacing. We recommend a trained professional handle any work that touches an automated gate’s internal safety loop. We have serviced thousands of these systems, and a gate that meets the standard is a gate that protects your family and your liability.
Usually not. The wind breaks the post loose from the concrete or shears the hinge, rarely the gate frame itself. We can re-plumb or replace the post, weld in reinforced hinge plates, and have your existing gate swinging straight again the same day. A whole new gate only makes sense when the frame has been twisted beyond straightening or the steel is rusted through in multiple places. Call (747) 774-7784 and we will give you an honest answer either way, with a free quote attached.
Yes, and we do it regularly on Compton’s shared rights of way. We section the work so the driveway stays passable while we weld, and if the gate has to come off its track temporarily, we make sure your neighbor knows the schedule and gets access restored that same day. We have done enough of these jobs that we bring the right blocking, supports, and traffic cones to keep the path safe. The quoted price includes the coordination, because a shared driveway is not an obstacle to us, it is just the job.
Call Ironworks Gate Co. for Gate Parts & Welding in Compton
If your gate is dragging, leaning, grinding, or just not right, call (747) 774-7784. A live person answers every call, 24 hours a day, seven days a week. We will send a background-checked, uniformed technician to your Compton home, quote the work before any steel is cut, and finish the job under the 90-Day Done Right Promise. Victor Salinas has been building this company since 1984, and he stands behind every weld we make. That is not a slogan. That is how we work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Compton and the surrounding communities.