Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Maywood
If your gate won’t open, sags against the sidewalk, or groans like it’s ready to give up, we can help. A typical gate repair in Maywood runs $180 to $650 depending on the damage, and most jobs are finished in a single visit. We know these streets: the narrow driveways off Slauson, the 1920s bungalows with original iron, the rental duplexes where the gate has to keep working for tenants every single day. Call (747) 774-7784 and a live person answers, any hour.
Maywood is a dense little city, just 1.18 square miles, and that changes how gate repair works here. There’s rarely room to stage equipment, rarely a clean 10-foot setback from the sidewalk, and very often a gate that hasn’t been touched since the Nixon administration. We plan for that before we arrive.
Why Ironworks Gate Co. Is Maywood’s Preferred Gate Repair Company
We’ve been doing gate work for over 42 years, and homeowners in Maywood call us because we understand what their properties actually look like. Tight lots. Stucco pillars from the 1930s. Hinges rusted into brick. Shared driveways where the gate absolutely cannot be down for a day while someone orders parts. Our Gate Repair team carries the hardware for these exact situations on the truck.
Victor Salinas leads our crews, and he’s the kind of person who will tell you plainly if a hinge can be saved or if you’re better off replacing the post. No upsell. No drama. Just a written quote before any work begins, and the 90-Day Done Right Promise in writing behind every job. If it’s not right, we come back and make it right. No paperwork, no arguing.
We dispatch from our Los Angeles office and keep crews working in Maywood throughout the week. For emergencies, we answer the phone 24/7 and can often be at your property the same day. For non-urgent work, we schedule a time and show up when we say we will. Maywood homeowners have been burned by no-shows before. We’re built to be the opposite.
Our Gate Repair Services in Maywood
Hinge & Post Repair
This is the bread and butter of gate work in Maywood. Older properties off Atlantic Boulevard and throughout the residential blocks east of the Vernon line have original wrought iron gates hung on posts set directly into stucco or brick pillars. After 70 or 80 years, the steel inside the pillar rusts, swells, cracks the masonry, and the gate starts to drop. We cut out the old post, set a new steel post with a proper footing, and re-dress the pillar so it looks like it was never touched. Hinge and post repair in Maywood typically runs $220 to $580, depending on whether we rebuild one pillar or both.
Gate Realignment
Maywood’s short setbacks mean swing gates have very little room to travel. When hinges wear or the post shifts even an inch, the gate drags on the sidewalk or won’t latch closed. Realignment involves re-welding or shimming hinges, adjusting the gate frame, and sometimes relocating the hinge plates entirely. For homes near Maywood Avenue and across the duplex-heavy blocks west of Carmelita, this is a near-constant issue. Most realignment jobs run $150 to $400 and are finished the same day.
Weld & Rust Repair
That dark brown staining on your gate isn’t just cosmetic. Maywood sits right next to Vernon’s industrial corridor, and the airborne particulates from that area settle on uncoated iron and accelerate corrosion. Welds fail faster here than in Bell Gardens or South Gate. We grind out the rust, reweld cracked joints, and apply a proper rust-inhibiting coating so the repair actually holds. Weld and rust repair in Maywood typically runs $180 to $500, depending on how many joints need work and whether we’re patching one picket or rebuilding a frame corner.
Electric Gate Repair
If your automatic gate opens halfway, reverses for no reason, or just hums and won’t move, the problem is usually in the operator, the safety photocells, or the wiring between them. We service nine gate-automation brands, including LiftMaster, DoorKing, and Elite, and we stock common parts locally so Maywood customers aren’t waiting a week for a capacitor. Electric gate repair in Maywood runs $200 to $650 for most operator issues, and a lot of them are fixed in one visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maywood
We work on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Maywood we see a lot of older DoorKing and Elite operators on rental duplexes and 1990s-era installations, plus LiftMaster on newer slide gate retrofits. We stock the common parts for all three brands, which means faster turnaround for Maywood customers and fewer second trips.
Common Gate Repair Problems We See in Maywood Homes
- Swing gates scraping public sidewalk. When a 1920s bungalow off Slauson has a gate with under three feet of setback, the swing arc frequently crosses onto the public right-of-way. This damages the gate edge and creates a tripping hazard. The real fix is often relocating the hinge post or converting to a slide gate.
- Rusted hinge posts inside original masonry pillars. This is the single most common failure mode across Maywood. The post corrodes inside the pillar, the masonry cracks, and the gate sags four or five inches. It’s a post reset job, not a hinge replacement.
- Premature rack and pinion wear from industrial particulates. Proximity to Vernon’s industrial corridor means fine dust and chemical residue from the air settle on gate tracks and operators. We see rack and pinion gears wear out measurably faster here than in purely residential cities nearby.
- Shared driveway access on duplex properties. Maywood has a high concentration of rental duplexes with one driveway serving two units. The gate has to keep functioning while we work. We plan repairs around tenant access, and we don’t take the gate down for a day unless there’s no other way.
Pricing for Gate Repair in Maywood, CA
Here are honest ranges for the most common jobs in Maywood. Hinge and post repair: $220 to $580. Gate realignment: $150 to $400. Weld and rust repair: $180 to $500. Electric gate and operator repair: $200 to $650. Slide gate track replacement or retrofit: $350 to $900. These are the numbers we quote from the truck, and the price is agreed in writing before a single bolt is turned. You’ll know the cost up front. We don’t surprise anyone on the invoice.
Three standing offers apply to Maywood customers: $50 off any repair over $250, a free second opinion on any written estimate from another company, and an $89 seasonal tune-up. Seniors and veterans always get 5% off. Call (747) 774-7784 for a free estimate on any gate repair in Maywood.
We Also Serve Cities Near Maywood
Our Gate Repair in Maywood coverage is strongest in the city itself, but we also take calls from Huntington Park, Bell Gardens, South Gate, and Lynwood. Same crew, same 90-Day Done Right Promise, same live person on the phone. If you’re adjacent to Maywood and your gate is failing, we’re close.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Maywood
It can usually be fixed either way, and the right answer depends on your specific setback. In Maywood the problem is almost always that the gate’s throw arc crosses onto the public right-of-way, which is both a code violation and a safety hazard. We can sometimes relocate the hinge post toward the property line and shorten the arc enough to clear the sidewalk. On many of the older bungalows with under three feet of setback, a slide gate retrofit is the cleaner long-term fix, and we quote both options before you decide. Call (747) 774-7784 and we’ll measure the site and give you a straight answer.
Maywood sits directly adjacent to Vernon’s heavy-industrial corridor, and the air carries fine particulates and mild chemical residue much of the year. That dust settles on uncoated wrought iron, eats the paint, and accelerates corrosion at hinges and post bases. Compounding it, most of Maywood’s original gates were installed without proper primer or rust inhibitor. We see this exact failure pattern repeatedly on gates throughout the city, and our weld and rust repair process addresses the root cause, not just the surface staining. A repair with proper rust-inhibiting coating will hold up much longer than a quick paint-over.
Yes, in nearly every case. We plan repairs around tenant access, which means we work on one side of the driveway at a time on swing gates, or we brace the gate in the open position while we service the operator. Most Maywood duplex gate repairs are completed in a single visit without the driveway ever being fully blocked. The only exceptions are cases where the post has failed entirely and the gate becomes unsafe to operate, and even then we work to restore access the same day. Tell your tenants the gate will keep working, and call (747) 774-7784 to schedule.
It can be either, but in Maywood we start by checking the physical gate first. When hinge friction, rust, or a sagging post makes the gate harder to move, the operator senses the resistance and reverses as a safety response. The dust from the industrial corridor also coats the safety photocells and causes false triggers. We diagnose the full system, not just the operator, because most of the time the motor is fine and the gate itself is the problem. Most operator diagnostics and fixes in Maywood run $200 to $400, and we quote the number before we start.
The simplest answer: if your gate was installed before the early 2000s and has never had an upgrade, it probably doesn’t meet current UL 325 entrapment protection requirements. Automatic gates in Maywood need functioning safety photocells, a reversing mechanism with obstacle detection, and appropriate warning signage. On many older duplex properties we inspect, the original operator predates these requirements entirely. We check entrapment protection as part of any electric gate repair, and we’ll tell you plainly what needs to be added. A gate that doesn’t meet current safety standards is a liability, and fixing it is cheaper than defending it.
Call (747) 774-7784 today for a free estimate on any gate repair in Maywood. Victor Salinas and our crews know these properties, these gates, and the exact problems Maywood homeowners face. You’ll get a live person on the phone, a written quote before work begins, and a 90-Day Done Right Promise in writing behind every repair.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Maywood with honest gate repair backed in writing.