Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Maywood
A new gate installation in Maywood typically runs $2,800 to $9,500 depending on material, operator, and whether we’re working around original pillars or starting fresh. Most homes here need a swing gate with corrected throw arc to clear the public sidewalk. We cover every Maywood street, from the bungalow rows off Slauson to the duplexes near Atlantic, and we quote the full price before any work begins. Call (747) 774-7784 for a free on-site estimate.
Maywood’s 1.18-square-mile footprint means almost every driveway gate swings directly over the public sidewalk. That changes how a gate gets installed here. Our crews know the sidewalk clearance rules, the pillar conditions, and the older gate hardware common to Maywood homes. A live person answers our phone 24 hours a day, 7 days a week. When you call, you get Victor Salinas or a team member who knows gates, not a voicemail tree.
Why Ironworks Gate Co. Is Maywood’s Preferred Gate Installation Company
Ironworks Gate Co. has spent over 42 years doing one thing: gates. Founded in 1984, we’ve watched Maywood’s housing stock age, and we’ve repaired and replaced gates on the same blocks for decades. The work here is not glamorous. It is old iron, tight lots, and pillars that have given up. We know that before we even arrive, which means we show up with the right steel, the right hinges, and the right operator on the truck the first time.
Maywood homeowners tend to have lived in their homes for twenty years or more. They’ve dealt with a handyman who promised a gate fix and left a worse problem. They call us because they want the job done once and backed in writing. Every completed gate installation carries our 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing.
Our technicians are background-checked and uniformed. They work in your home the way they would work in their own mother’s. And because we’re trained on nine gate-automation brands, we can retrofit a modern operator onto a 1940s gate without guessing. Victor Salinas guides the K.E.Y.S. values code on every job: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
Our Gate Installation Services in Maywood
Driveway Gate
A driveway gate on a Maywood bungalow has to work within severe space limits. Many homes have less than ten feet between the house and the sidewalk. We measure the actual swing arc before ordering anything, because a gate that swings into the public walkway becomes a code violation and a trip hazard. Our Gate Installation team handles the full scope: steel posts, hinges, gate fabrication, operator, and safety edges. Most driveway gate installations in Maywood run $3,200 to $7,800 installed.
Pedestrian Gate
Walk gates on Maywood properties sit tight against the house or the side fence line. The original gate often hangs on posts set into crumbling stucco. We replace the post, re-hang the gate, and adjust the latch so it closes square and stays closed. Pedestrian gate installation in Maywood typically runs $900 to $2,400, depending on whether we’re building new or repairing what’s there.
Sliding Gate
Sliding gates are rare in Maywood but viable on corner lots or the wider properties near Maywood Avenue. A slide gate needs side rail clearance, which most mid-block lots simply don’t have. When a slide gate does make sense, we handle the track, the rack, the motor, and the safety edges, all in one visit. Linear and Ghost Controls slide operators are common choices here. Expect $4,000 to $8,500 for a full slide gate installation in Maywood.
Swing Gate
Swing gates account for the overwhelming majority of Maywood driveway gates. The original 1940s and 1950s iron is often salvageable, but the hinge posts are not. We set new steel posts in fresh concrete footings, re-hang the gate with corrected sag, and add a LiftMaster or DoorKing swing arm if you want automation. Swing gate installation or rebuild in Maywood runs $2,800 to $6,500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maywood
We install and service Linear, Viking, Ghost Controls, and DoorKing operators, among others, and we carry common parts in our trucks so a Maywood call doesn’t turn into a two-week wait. Older DoorKing units appear all over Maywood on gates from the 1990s and early 2000s, and many have control boards that are now obsolete. We can often retrofit a current LiftMaster or Ghost Controls motor onto the existing gate and posts, avoiding a full replacement when the iron is still sound. We quote the operator, the mounting hardware, and the labor as one line item so the price is settled before a single bolt is turned.
Common Gate Installation Problems We See in Maywood Homes
- Hinge posts rusted out inside original pillars. Trapped rainwater rots the steel where it enters the brick or stucco. The gate sags and binds before the operator fails. We cut the old post out, pour a new footing, and reset with proper drainage.
- Pre-UL 325 swing gates with no photo-eyes. These older gates lack entrapment protection. Adding an operator to a gate with a short throw on a tight Maywood driveway creates a real safety risk. We install current safety edges and photocells as part of any automation job.
- Wooden gate frames warped by Santa Ana heat. Maywood’s dry inland heat cycles split and bow wood over time. A warped frame breaks rack and pinion components on slide gates and throws swing gate alignment off. We use reinforced steel frames or properly seasoned lumber to prevent this.
- Gates that swing into the sidewalk. With almost no setback, a gate hung even two inches too deep will clip the public walkway. We calculate the throw arc against the actual property line, not an assumption. This is the single most common reason a Maywood gate needs correction.
Pricing for Gate Installation in Maywood, CA
A typical pedestrian gate in Maywood runs $900 to $2,400. A swing gate installation or full rebuild runs $2,800 to $6,500. A driveway gate with an automatic opener and safety system runs $3,200 to $7,800. Slide gates, when the lot allows, run $4,000 to $8,500. What moves the number is the condition of the existing pillars, whether we’re salvaging the original iron, and the operator brand you choose. We quote the full price in writing before any work starts. That price is the price. No surprises on the bill. Estimates are free, and we offer a Free Second Opinion on Any Written Estimate. We also apply a standing 5% Senior and Veteran discount, and there is $50 Off Any Repair Over $250. Call (747) 774-7784 and we’ll come measure.
We Also Serve Cities Near Maywood
Our Gate Installation in Maywood crews also cover Huntington Park, Bell Gardens, South Gate, and Lynwood. If you’re just over the city line, we likely already have a truck nearby. Call (747) 774-7784 and we’ll confirm service for your street.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Maywood
Yes, in most cases we can, as long as the posts themselves are still structurally sound. If the steel has rusted through, we replace the posts first and then mount a current operator like a LiftMaster or Ghost Controls swing arm. We also add required safety photocells and edges. Call (747) 774-7784 for an exact assessment. Estimates are free.
Because Maywood’s lots are so small that nearly every driveway gate swings over or near the public sidewalk. The city reviews swing arc clearance, which means a gate that would be routine in Huntington Park or South Gate often requires a permit review here. We handle the permit paperwork and the clearance measurements as part of the install. Call (747) 774-7784 and we’ll explain what your specific property needs.
Usually you can’t, because a slide gate needs enough side rail space for the gate to pull fully clear of the opening. On a tight mid-block Maywood lot, that space typically doesn’t exist. When a slide gate does work, it’s generally on a corner lot or a wider property near Maywood Avenue. We’ll measure and tell you honestly which gate type fits your driveway. Call (747) 774-7784 for a free measure.
They accelerate warping and splitting, especially on gates that get direct afternoon heat. We use reinforced steel frames or properly seasoned, sealed lumber for wood gates in Maywood, and we set hinges to account for seasonal movement. A gate built for the coast will not hold up to Maywood’s dry wind season.
Yes, current safety standards require entrapment protection on any automated gate. If you’re adding an operator to an old gate, we install photocells and safety edges as part of the job. Pre-UL 325 gates without these protections are common in Maywood, and retrofitting them is a standard part of our work. Call (747) 774-7784 to schedule an inspection.
Call Ironworks Gate Co. for Gate Installation in Maywood
You want a gate that closes square, holds up to Maywood’s heat and rain, and never leans into the sidewalk. That’s exactly what we build. Every job is quoted before work starts, backed by our written 90-Day Done Right Promise, and handled by technicians who treat your home like their own mother’s. Call (747) 774-7784 for a free estimate. A live person answers, 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Maywood gate installation needs with over 42 years of dedicated gate experience.