Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Access Control Across Maywood
Gate access control in Maywood means retrofitting keypads, phone entry systems, video intercoms, and card readers onto gates that were built when the homes were - mostly between the 1920s and 1950s, on lots with almost no room to work. That’s exactly the kind of tight, sidewalk-adjacent work we do every week. If you’re on East 55th Street, Slauson Avenue corridor, or any of the numbered streets near Atlantic, we can usually have a technician at your gate the same day. Call (747) 774-7784 and a live person answers - 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Maywood’s Preferred Gate Access Control Company
Maywood is dense. Roughly 1.18 square miles, packed with bungalows and duplexes on narrow lots, where the front gate often sits a step or two from the public sidewalk. Generalist handymen who work across Los Angeles County rarely see this as a daily condition. We do. Our access control team has spent years working on Maywood’s small-lot residences, and we know what happens when a swing gate’s throw arc crosses a sidewalk, when a keypad corrodes early from Vernon-adjacent air, or when a loop detector won’t sense a car parked on a short driveway apron.
Every job we complete is protected by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right - no arguing, no paperwork. That’s the standard on every Maywood job, from a single keypad replacement to a full phone-entry retrofit on a shared duplex driveway. And every call is answered by a live person, 24/7. Not a voicemail, not an answering service.
Our Gate Access Control Services in Maywood
We install and repair the full range of Gate Access Control equipment for Maywood homes. Here’s how each service typically plays out on the ground here.
Keypad Entry
A keypad entry system on a Maywood swing gate usually runs $275-$600 installed, depending on whether we’re adding a standalone keypad or integrating it with an existing opener. On the older bungalows near Euclid Avenue, many original keypads are mounted directly to stucco pillars that have shifted over decades - we set new backplates and seals so the digits don’t fail two winters in.

Remote Control
Adding or replacing remote control capability on a Maywood gate typically costs $150-$400, including programming. Most of the remotes we replace are on Gate opening systems that have been in service since the 1990s or early 2000s. If you need more than two remotes or want a keychain transmitter for a back gate, we price that before any work starts.

Phone Entry
Phone entry systems let you open the gate from your smartphone or from a landline - useful on Maywood duplexes where two units share one driveway. A basic single-line phone entry retrofit starts around $450; a cellular-based unit that doesn’t need a wired phone line runs $650-$900. These get installed every few weeks on properties near the 90270 ZIP, where shared driveways are the rule, not the exception.

Card Reader
Card reader access for a Maywood property runs $350-$750 installed, depending on whether you need a standalone reader or a networked system with multiple credentials. On several streets south of Randolph Street, landlords use card readers rather than keypads because tenants change more often - a card is simpler to deactivate when someone moves out.

Smart Access
Smart access bridges your gate opener to your phone or home network. On Maywood homes, we often pair a smart controller with a safety photocell and loop detector retrofit because the original installation predates any of that. A complete smart access setup on a single swing gate typically runs $500-$950, and we’ll talk you through the app during the install.

Video Intercom
Video intercom systems for Maywood homes run $700-$1,400 installed for a single entry point. The key here is mounting position. With sidewalks so close to the gate, we mount the intercom housing at an angle that clears the swing arc - more on that below.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maywood
We’re trained and equipped on nine gate-automation brands, and the three we handle most often in Maywood are DoorKing, Elite, and LiftMaster. Most Maywood gates from the late 1990s and 2000s run on DoorKing or Elite operators, and LiftMaster dominates newer retrofits. Because we stock parts for these brands locally, we can often complete repair work in a single visit rather than ordering a component and returning a week later. That matters when your only street access is through the gate.
Common Gate Access Control Problems We See in Maywood Homes
- Corroded keypad buttons from industrial-adjacent air. Maywood sits directly against Vernon’s industrial corridor, and the airborne particulates settle on keypad contacts faster than in most of southeast LA. Intermittent digits - a 3 that works only sometimes - is the telltale sign, and it’s the fix we make most often in Maywood.
- Loop detectors that won’t sense short driveway aprons. When a car stops near the sidewalk, the gate controller may not register the vehicle still inside the detection zone. On many Maywood lots there’s barely room for one car behind the gate, so the loop placement has to be unusually precise. We recut and reposition loops here far more often than in surrounding cities.
- Video intercoms knocked out of alignment by swing-gate arcs. A sagging gate on a Maywood sidewalk-adjacent pillar sweeps its arc right over the sidewalk. If the intercom housing sticks out even a few inches past the pillar face, it catches on a passing hand cart, stroller, or shoulder. We remount intercoms flush to the post face and away from the arc.
- Shared driveway access conflicts on duplex properties. Two units, one gate, one keypad. When a tenant’s code stops working, the other unit is often the first to complain. We build separate entry codes with staggered schedules so both units stay operable during any repair or retrofit.
Pricing for Gate Access Control in Maywood, CA
Here’s what you can expect to pay in Maywood right now, based on jobs we’ve completed in the last year. A keypad replacement runs $275-$600 installed. Remote replacement or programming runs $150-$400. Phone entry starts at $450 for a basic wired unit and $650-$900 for cellular. A card reader system runs $350-$750. A video intercom runs $700-$1,400 for a single entry point, and a complete smart access setup runs $500-$950. Labor is included in every number above, and the price is quoted and agreed before any work starts. No surprises on the bill. Ever. Call (747) 774-7784 for a free estimate.
One more thing worth knowing: since Maywood’s housing is almost entirely 1920s-1950s construction with original gate pillars, post-and-hinge restoration frequently factors into the access control cost. A keypad you mount on a failing pillar is a keypad you’ll replace in two years. We’ll tell you honestly what the pillar needs first.
Information-Gain: Why Maywood Access Control Is Different
On many Maywood streets, the front swing gate’s throw arc extends over the public sidewalk because property lines begin almost at the curb. Retrofitting a keypad or video intercom without first addressing the gate’s pivot and clearances creates a code liability that technicians from neighboring, roomier cities rarely see as the default condition. We’ve seen city code enforcement flag exactly this on several properties near Otis Avenue and the streets just north of Slauson - a gate that swings out past the property line, where an intercom or keypad post now sits in the pedestrian path.
Here’s the field example we always think of. On a duplex off East 55th Street we swapped a rusted FAAC swing-gate operator on a narrow shared driveway for a LiftMaster slide-gate operator with rack and pinion. The original hinge posts were set into crumbling stucco pillars with almost no setback from the sidewalk, so we installed a safety photocell and a Viking keypad entry on a short post footing that let both tenants keep using the driveway while we rebuilt the post bases. That job took a little longer than a standard swap, but it passed inspection the first time, and both units kept access the entire day. If you’re wondering whether a generic install would have survived on that driveway - it wouldn’t have.
Maywood’s position directly against Vernon also means airborne particulates corrode gate hardware and paint faster than in purely residential surrounding cities. Because virtually every Maywood property borders the sidewalk with almost no driveway depth, swing gates frequently have dangerously short throw arcs and conflict with public sidewalk clearance. When we install access control here, we plan for those two facts from the start: weather-sealed enclosures, flush-mount intercoms, and short-throw gate retrofits. That’s the work.
We Also Serve Cities Near Maywood
If you’re just outside Maywood proper, we also serve Huntington Park, Bell Gardens, South Gate, and Lynwood. The same-day visit and pricing structure applies across the area, and our crews know how the gate conditions change block by block through these neighboring cities.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Maywood
Yes. The key is to mount the keypad flush to the pillar face or on a short post footing set behind the property line, and to correct any gate swing that extends over the public sidewalk before adding new hardware. On Maywood’s tight lots, that sidewalk sweep is the default condition, and we treat it as part of the install. Code enforcement complaints here almost always come from the gate crossing the property line, not the keypad itself. Call (747) 774-7784 and we’ll check your specific swing arc on the estimate visit.
In Maywood this is almost always a failing loop detector. The driveway apron is so short that a car stops beyond the detection zone, the detector loses the vehicle, and the gate controller cycles open or closed thinking the area is clear. The fix is relocating the loop cut deeper into your property edge and adjusting the sensitivity so it holds the detection zone for the entire vehicle length. We see this weekly on Maywood duplexes and bungalows with tight frontage. It’s a $180-$350 repair depending on the existing loop wiring.
If you can’t see who’s at the gate from your front door, yes - a video intercom lets you see and talk to the person before opening. On narrow Maywood walkways, the install needs a flush mount against the pillar face, clear of the swing gate’s arc, and weather sealing for the particulates that drift over from Vernon. That’s the difference between a system that works for a decade and one that corrodes in two replacement seasons.
We configure a phone entry system with separate user credentials for each unit, plus a keypad backup so nobody gets locked out if a phone dies. On Maywood shared driveways, we also add a safety photocell if one isn’t present, because two tenants cycling one gate increases the chance of a vehicle sitting in the swing path. The unit-specific credentials happen during setup, and we test both units’ access before we leave.
The limit switch inside the opener isn’t syncing with the actual gate position. On older Maywood gates with worn hinges and shifted pillars, the gate may close fully but not quite reach the limit contact that tells the controller it’s closed. The app reports what the controller believes. We adjust the limit, check for hinge sag, and re-sync the controller so the app reflects the real gate state. It’s a service call, usually $150-$300.
Ready to Get Your Gate Access Working Right in Maywood?
If your keypad is flaking out, your phone entry won’t open for the other tenant, or you just want a smart access system that won’t fail inspection on a sidewalk-adjacent gate, call us. We’ll give you a straight answer on what’s wrong, what it costs, and what will actually last on your property in Maywood. The price is quoted and agreed before any work starts, and every job is backed by our written 90-Day Done Right Promise. Call (747) 774-7784 for a free estimate. Senior and veteran discounts are always 5% off, and we always have a $50 off any repair over $250 and a free second opinion on any written estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Maywood and surrounding communities with gate access control, gate repair, and gate installation for over 42 years.
Before
After
Before
After
Before
After