Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Boyle Heights
Gate installation in Boyle Heights runs $1,850 to $6,200 for most driveway gates, with custom ornamental work on those pre-war bungalows and duplex lots landing between $3,500 and $9,000. We build and install gates that survive the Santa Ana wind corridor along the LA River, handle narrow 1910s driveways, and sit square on aging concrete posts that have shifted for decades. Call (747) 774-7784 for a free estimate, and we’ll have a technician out to measure your Boyle Heights property, usually within 48 hours.
Ironworks Gate Co. has been in the gate business for over 42 years, founded in 1984. We work on Boyle Heights gates every week, from Cesar Chavez Avenue to the flats near Hollenbeck Park and up through the hills off Soto Street. When we say a gate will close like the day it was hung, we mean it. And we put that in writing.
Why Ironworks Gate Co. Is Boyle Heights’s Preferred Gate Installation Company
Victor Salinas, who leads our crew, knows what Boyle Heights gates look like after 40 years of wind, earthquakes, and narrow-lot living. The wrought iron on a 1920s Craftsman off Breed Street does not match the hardware on a 1980s duplex gate near Mariachi Plaza. Neither takes a stock hinge kit without modification. We bring the welder, the concrete saw, and the patience to do it right on the first visit.
Our Boyle Heights customers call us because the last contractor put in a gate that sagged within a season. We hear that story often. The fix is rarely just new hinges. It’s usually post realignment, a proper footing pour, and fabricating hardware to match what’s already there. That’s the work that lasts, and that’s what we do.
Every job is covered by our 90-Day Done Right Promise, a written guarantee with no paperwork and no arguing. If something isn’t right, we come back and make it right. That’s the Keystone Standard, and it applies to every gate we hang in Boyle Heights.
Our office dispatches from Los Angeles, and our crews serve Boyle Heights locally. A live person answers the phone 24 hours a day, seven days a week. No voicemail trees, no callbacks on Monday morning. Call (747) 774-7784 and you’ll get a person.
Our Gate Installation Services in Boyle Heights
Driveway Gate Installation
Most Boyle Heights driveways are tight. A 1910s Craftsman near Indiana Street or a Spanish Colonial Revival off Fourth Street often has six to eight feet of width between a cracked concrete pillar and a stucco wall. We measure for swing clearance, post depth, and operator swing before we ever order steel. A standard driveway gate installation in Boyle Heights generally runs $2,400 to $5,800 depending on width, ironwork, and automation.
Pedestrian Gate Installation
Pedestrian gates in Boyle Heights don’t get the credit they deserve. They’re the daily entrance, the one that catches wind, the one that slams when a post shifts. We build and install pedestrian gates matched to your vehicle gate or independently, with hardware that holds up to the wind funnel off the river corridor. Expect $900 to $2,600 for a solid welded pedestrian gate with proper hinges and latch.
Sliding Gate Installation
If your Boyle Heights driveway slopes or you don’t have room for a swing arc, a sliding gate is usually the answer. We install cantilever and track-guided sliders, and our automation work covers the brands that actually hold up under heavy daily cycles. A sliding gate installation on a Boyle Heights lot typically ranges $3,800 to $8,500, including the operator and safety edges.
Swing Gate Installation
Swing gates are the most common driveway gate in Boyle Heights, and the most abused. Wind torque, shifting posts, and aging hinges all work against them. We install single and double swing gates with reinforced post hardware, proper hinge placement, and operators sized for the gate’s actual weight. Double gate installations run $4,200 to $9,000 here, with single swing gates starting around $2,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boyle Heights
We’re factory-trained on nine gate-automation brands, including LiftMaster, DoorKing, and Elite. That matters when a Boyle Heights home still runs the original DoorKing board from the 1990s and the owner wants it working tomorrow, not waiting on a backordered part. Most jobs are completed in a single visit because our techs carry the parts. For repairs over $250, take $50 off. And we’ll always give you a free second opinion on any written estimate from another shop.
Common Gate Installation Problems We See in Boyle Heights Homes
- Aging concrete pillars shifting out of plumb. Those 1910s-1940s pillars on narrow-lot driveways crack and lean over decades. A new gate bolted to a leaning post will never hang right. We reset or pour new footings when the post can’t be salvaged.
- Santa Ana wind torque on swing-gate frames. Wind funneling through the LA River corridor hits Boyle Heights harder than neighborhoods further west. We see swing gates racked out of square every fall. Reinforced diagonal bracing and heavier post anchors solve it.
- Custom-welded gates with non-standard lag spacing. The 1970s-1990s local fabricators bent their own hinges and eyeballed their lag spacing. A stock hinge kit from a supply house won’t line up. We fabricate on-site to match the original iron.
- Operators overworked by heavy ornamental gates. A beautiful wrought iron double gate can weigh 600 pounds. A builder-grade operator burns out in two years. We size operators to the actual gate weight and the wind load it faces.
Pricing for Gate Installation in Boyle Heights, CA
Here are honest ranges for gate installation in Boyle Heights, based on what we’ve quoted on actual streets: pedestrian gate $900-$2,600; single swing driveway gate $2,200-$4,800; double swing gate $4,200-$9,000; sliding gate $3,800-$8,500; full custom ornamental gate with automation $6,000-$14,000. The price is quoted and agreed before any work starts. No add-ons at the end. No surprises on the bill. We’ll walk the property, take measurements, and give you a written number. Free.
We Also Serve Cities Near Boyle Heights
Our Gate Installation team covers the surrounding area as well. If you’re in Huntington Park, Florence-Graham, Lynwood, or Maywood, we handle gate work there too. Same crew, same 90-Day Done Right Promise, same live person on the phone. Read more about our Boyle Heights service area or just call (747) 774-7784 and tell us where you are.
Gate Installation in Boyle Heights: What We’ve Learned on the Ground
Boyle Heights has an exceptionally high saturation of ornamental wrought iron gates, both pedestrian and vehicle, installed across its dense blocks of pre-WWII bungalows and small multi-family buildings. Many were custom-welded by local metal shops in the 1970s through the 1990s. Those gates are not interchangeable with off-the-shelf hardware. The lag spacing is non-standard, the hinges were hand-bent, and the posts they hang on have been settling for half a century. So gate installation here leans heavily on welding, post realignment, and fabricating compatible components rather than simple part swaps. That skill set is what separates a gate that closes true from one that drags on the striker plate from day one.
We see it on Cesar Chavez Avenue, on the residential blocks south of Evergreen Cemetery, and around the duplexes near the 5 Freeway. The house gates from the 1980s were built by someone’s uncle, a local fabricator with a welder and a good eye. They’re not square by modern standards. They’re often heavier than they need to be. And the hardware was whatever that shop had on hand. When we install a new gate on an old Boyle Heights post, the first thing we do is check whether the post itself is even worth keeping.
One example from a recent job on a Craftsman bungalow off Cesar Chavez Avenue. We installed a custom double swing gate with a LiftMaster operator. The original hinge post had cracked under years of Santa Ana wind torque, so we poured a new footing and set a fresh post. Then we fabricated hand-bent hinges on-site to match the original 1980s lag spacing. A supply house hinge kit would have left a half-inch gap and thrown the whole gate off. That job isn’t on our website as a marketing line. It’s just what the work looks like in Boyle Heights.
This page tells you how to install a gate that survives Boyle Heights’ Santa Ana winds, narrow 1910s driveways, and aging concrete posts. Not just the generic hardware swap a westside contractor would quote from a catalog. The soil here is dense but shifting, the wind patterns are real, and the housing stock predates standardized gate hardware. If you’re reading this from a house built before 1940, your gate install is a fabrication job as much as an installation job.
A Word on the Wind and the Posts
Boyle Heights sits on the inland-facing slope of the LA Basin where Santa Ana events funnel through the LA River corridor with extra force. That wind repeatedly stresses hinges, torques swing-gate frames, and overworks older automatic operators. It’s a more frequent repair call here than in coastal LA neighborhoods, and it affects how we install from the start. Heavier posts, deeper footings, and diagonal bracing aren’t upsells in Boyle Heights. They’re the difference between a gate that works for 15 years and one that needs a service call every autumn.
Matching the Ornamental Character
There’s a particular look to Boyle Heights wrought iron. Scrollwork, spear tops, sometimes a family initial worked into the design. When we build a new gate for one of these homes, we match the style of the original, not just the width of the opening. Victor Salinas has spent years fabricating and installing ornamental gates across Los Angeles, and he knows when a new gate should blend in, and when a homeowner wants something cleaner and more modern. Either way, the welds are clean, the corners are square, and the finish is done to hold up under sun and smog, not just look good on install day.
Serving Boyle Heights, CA - Our Local Coverage Area
We’re based in the Boyle Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Boyle Heights
The most common reason is that the concrete post has cracked or the original lag holes have wallowed out over decades of wind load. On Boyle Heights homes built before the 1940s, the concrete is often superficial over a rubble or brick core, and anchors won’t hold. We drill and epoxy new anchors where the post is sound, and replace or sister the post when it’s not. Call (747) 774-7784 and we’ll tell you what you’re actually working with, free.
Usually not. The 1970s-1990s fabricators in Boyle Heights bent their own hinges and drilled lag spacing by eye. A stock kit from a supply house won’t line up, and forcing it throws the gate out of plumb. We fabricate hinges on-site to match the original spacing, which is faster than adapting and looks cleaner. If you’ve already bought a kit, we’ll make an honest call on whether it’s usable before you spend another dollar.
Wind funneling through the LA River corridor hits Boyle Heights swing gates with enough force to rack the frame and pull the operator out of alignment. If the gate was installed with a builder-grade operator and standard posts, it will drift every fall. We fix this with reinforced post anchoring, diagonal bracing, and an operator sized for the actual wind load, not just the gate weight.
First we saw-cut the old footing and dig a deeper, wider hole, usually 30 to 42 inches deep depending on soil. On a narrow lot, the challenge is doing this without undermining the adjacent walkway or the neighbor’s wall. We form the new footing flush with the driveway edge, set the post with epoxy anchors or a wet-set base, and give it proper cure time before hanging any iron. The post is the gate’s foundation. Skip it and the whole install fails.
Yes. We fabricate and weld custom ornamental iron in the same patterns you see across Boyle Heights, whether that’s the scrollwork from a 1970s double gate or the simpler spears on a 1920s pedestrian gate. Victor Salinas has been fabricating ornamental iron for decades, and when we can’t match something exactly, we’ll tell you straight, not fake it. Call (747) 774-7784 for a free estimate and we’ll bring samples of our work with us.
Get a Free Estimate for Gate Installation in Boyle Heights
Call (747) 774-7784. A live person answers, day or night. We’ll schedule a free measure, ask about your driveway, your wind exposure, and your existing posts, and give you a written price before any work starts. The price won’t change on you. The gate will hang square and run quietly. And if it’s not right, we’ll come back and make it right, because that’s the Keystone Standard, and it’s been our standard for over 42 years.
Senior and veteran? Take 5% off, always. Need a seasonal tune-up on an existing gate? $89. Want a second opinion on someone else’s estimate? Free. And $50 off any repair over $250. Call (747) 774-7784 and tell us where in Boyle Heights you are. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Boyle Heights with gate installation, repair, and automation since 1984.